It
is very important that your boiler remains in a perfect working
condition, especially within the period of inactivity until when it will
be put into use. You wouldn't want a situation whereby, on a cold
morning, you try to make use of your boiler only for you to discover
that it has broken down.
Such
a situation can cause you total confusion, consequently creating higher expenses for you. Therefore, it is crucial that you take necessary precautions to prevent such a moment like this from happening.
 |
| Boiler Maintenance Tips |
Below is a list of our top 10 tips in maintaining your boiler,
Boiler Servicing carried out on a yearly basis
It
is strongly advisable to make sure that your boiler is serviced
regularly every year. This enables your boiler to be in a good working
condition, especially when it hasn't been used for a long period.
Make sure you seek the services of the professional experts. Our emergency boiler installation in London experts are always available to assist you to endeavor that your boiler never disappoints you during the cold season.
Bleed Radiators
Whenever
you put your boiler into use, allow it to stay awhile. You'll discover that not all of the radiators get hot immediately due to air stored in the radiator. Proof of this is that the base of the radiator is hot while on top is cold.
The solution to remedying this situation is as follows,
- Find an already used piece of cloth and the key to the radiator.
- Make sure that the floor is covered with a plastic material if at all, there is leakage.
- Insert the key into the valve of the radiator and move it in an anticlockwise direction gradually. While doing this, make sure that the piece of cloth is held directly under the key to stop any excess water from leaving.
- You'll notice a hissing sound. This is the air leaving the radiator.
- After a period, water will start ejecting from the radiator in place of the hissing sound.
- Use the cloth to stop the escape of excess water.
- Now close the valve by moving the key to the radiator in a clockwise direction.
- You'll discover that the radiator now regulates heat all over.
When
you must have finished undergoing the process listed above, your boiler
might require a refill due to the reduction in pressure.
Common problems associated with your radiator
A case in which the valve is painted: most times, it becomes difficult to
release the valve in this instance. Therefore, what you need do is to exert an amount of pressure to release it. If you experience any difficulty in doing this, contact us at an emergency boiler installation, and we'll assist you immediately.
A case in which the radiator is only heated on top:
this only happens as a result of the presence of sludge in your radiator. Therefore you need to power flush the system. Get in touch with us for your central heating and additional guidelines.
A case in which there is no heating:
Make sure that the valve is in a clockwise direction, this means the radiator is on. But in a situation, whereby the radiator is on, and there is still no heating, then the valve must have developed a fault.
In which case, you have to get a new valve. It is also advisable that
you get a thermostatic radiator valve which enables you to regulate the
heat settings to suit you better.
Trying to balance your radiators :
This process involves moving your radiator valve to regulate the heat settings. You'll find out that some of them are cooler than the rest after you must have carried out the radiator bleeding. So it basically involves trying to balance the temperature in the radiators. Be sure to contact us at 4D Heating and Plumbing Expert to grant you any further assistance if you encounter any difficulty.
Routine inspection of the pressure in your boiler: Make sure that the pressure gauge is set at the standard pressure level when your boiler is in use. You can always adjust the pressure whenever it
is down by increasing it.
Be
sure not to spoil the pressure release valve in the process of regulating it. In case it develops any fault, contact our professional experts for emergency boiler installation London to partake of our quality services.
Notice any leakage from the overflow pipe of the boiler
: Most times, you might notice that there is a leakage from the
overflow pipe of your boiler. This usually occurs when there is a
problem with the pressure release valve of your boiler or in a case
whereby the boiler has developed problems.
Maintain Ventilation: For your boiler to perform more efficiently, the area in which it is positioned has to have a lot of free space surrounding it. Usually, there is a standard requirement in respect to the amount of ventilation necessary for your boiler.
The accessibility of the flue : It is a vital safety precaution when it comes to providing access ways to the flue. This is advisable to make sure that there is a 100 percent visibility of all the sides of the flue in case there is any leakage. For further inquiries on this subject matter, contact our central heating London experts.
Check for the blue flame: The presence of a blue flame when your boiler is in use means that the boiler is in good working condition. But a case whereby the color of the flame changes to yellow or orange color, then it means there is a problem with your boiler. Endeavor to get in touch with our professionals to assist you with your emergency boiler installation.
Seek the help of Professionals:
Whenever your boiler develops any fault, make sure that you call the assistance of experienced and highly trained engineers to help you repair your boiler. Our highly trained experts are always available 24
hours to provide you with reliable and quality heating and plumbing services in London.
The next time you wish for a 24 hours emergency plumber in London
that will always be available to fix all your plumbing needs, think of
4dheating and Plumbing company. We are dependable and can offer professional plumbing services.
- A case in which the valve is painted: most times, it becomes difficult to release the valve in this instance. Therefore, what you need do is to exert an amount of pressure to release it. If you experience any difficulty in doing this, contact us at emergency boiler installation, and we'll assist you immediately.
- A case in which the radiator is only heated on top: this only happens as a result of the presence of sludge in your radiator. Therefore you need to powerflush the system. Get in touch with us for your central heating and additional guidelines.
0 Comments: