
HELPFUL WAYS TO PASS AN ELECTRICAL REPORT INSPECTION
If
you have an electrical inspection test coming up, you're bound to have a
little butterfly in your stomach. You can’t be too sure of what to
expect neither do you have any idea of the criteria used in judging your
electrical works. If you've carried out a new installation, you might
be skeptical considering the amount invested.
![]() |
Electrical Report Inspection |
However,
this review isn't one you should be worried about. As much as it gives
most homeowners a lot to ponder about, it's in your best interest. Wrong
installation puts you and your entire household at risk; hence, the
need for a highly recommended electrician in London.
The consequences range from shock, fire and even electrocuting.
To
get good grades from your inspector, there are a few things we've
learnt to put in place before their arrival. Doing this, the probability
of getting a negative grade is minimized. Rather than getting a bucket
full of complaints at the end of the day, we've compiled a few tips on
what adjustment to make before the next inspection.
Taking a peek from some of our experts, here are key changes to make to pass an electrical inspection report
Apply For Permit To Carry Out DIY electrical Works
If
you have any experience working with an emergency electrician in London
or have done some electrical works in the past, you're bound to feel
confident about attempting the same in your home. Before going ahead
with this, we advise that you apply for an electrical permit from your
local government. The application process is simple.
All
you need do is fill a form that requires you to write down your name,
residential address, type of electrical work performed, as well as the
cost of the project related to the permit. After a few weeks, you will
get a call to inform you about the outcome of your application.
If
approved, you will be required to pick up your permit immediately. The
cost of getting a permit depends on the type of project at hand.
However, expect to be charged from $68 before you can obtain the permit.
Invite The Inspector Over
When
you schedule an appointment with the inspector, try to build a rapport
before he comes over. Try to ask him questions related to what you
expect to see as well as pitfalls to avoid. Regardless of the inspector
that comes in, try to get their requirements before proceeding.
Conversing with them is an excellent way to establish a connection and
get to know them one on one.
Don't Add Any Device
During
the inspection, avoid connecting additional devices. You can't add any
circuit, lights or switches while the inspection is on. If you intend to
add an extra outlet on the existing circuit, ensure its added to the
outlet. The outlets on the old circuits won't need any adjustment but if
you disturb the wiring in any outlet, ensure you do not install any
device for inspection.
Tighten All Connections
In
each outlet or electrical box location, ensure the wires are properly
tied. This is one thing inspectors look out for and one that will
probably lead to a bad grade. However, ensure you avoid tieing things
together and ensure the hot and neutral should be separated adequately
if your emergency electrician in London forgot to do so.
Fire Block
Look
out for holes and penetration from one floor to another or one room to
the other. All holes need to be blocked to prevent fire outbreak or you
might also choose to use the hole as a chimney. You can also opt to use
fire block foam to fill any holes.
Drill Holes In Boxes
This
is one new feature to consider and one your inspector might likely
point out. However, you won't get a negative grade for not doing so but
it is always better not to take any risk. If you happen to have a tab
that snapped off from the electrical box, you can jam it into a hole
rather than waiting for your Inspector to point it out.
Use Current Breaker
Another
change you will have to make before the arrival of your Inspector is to
look out for the circuit breaker. It's better to use a circuit breaker
with a minimum of 15 amp interrupter. The interrupter protects you
against arc and should be present on all circuits in residential spaces.
You can get an interrupter from a hardware store but they might not
come cheap.
void Powering The Circuit
If
you've just installed a new breaker, you probably have all the wires
tied to the breaker. Naturally, you might want to start powering the new
breaker. However, avoid doing this if all the devices haven't been
installed.
Conclusion
That's
probably all the precautions you will need to take to get a pass during
your electrical review. There are others to consider but this are the
ones your Inspector is most likely to point out. If your offense is
minor, your inspector will likely point out things you need to fix
without penalising you. However, ensure all the mistakes pointed out are
rectified before the next inspection.
To avoid any hitches, hire the service of a qualified electrician from Electric Works London and you will be guaranteed of quality, affordable and reliable services.
0 Comments: